咨询热线:021-31332784
C
联系我们
ontact us

上海慎悟自动化科技有限公司

地址:上海市奉贤区奉浦工业园奉浦大道111号

联系人:郭赛

手机号:17521136887

电话:021-31332784

传真:021-31332788

邮箱:info@swsensors.com

网站:www.swsensors.com

 

X-sensors
您当前的位置:首页>X-sensors
当前位置:X-sensors >> 应变传感器 >> X-103-7
X-103-7 [返回]

STRAIN SENSORS FOR STATIC APPLICATIONS, WITH INSTALLATION ZERO

· For static applications

· With external input for zero-point adjustments, teach-in is stored permanently (installation zero)

· For weight, level, force and construction monitoring

· Measuring very small strains in rigid structures

· With integrated amplifier with ± 10 V or 4-20 mA

Applications

The strain sensors are particularly suitable for static measurements, for example at the monitoring of structures or in the weight measurement of silos. Thanks to the digital input, the zero point adjustment can be easily teached-in by the PLC.

The strain sensors for static applications are suitable for the following use cases:

· Determination of weight by measuring the deformation in the weight-bearing structure. This is a cost-effective way to retrofit existing construction, e.g. a silo, with a weight measurement.

· Monitoring of mechanical deformation at components

· Monitoring of loads at constructions and buildings for avoiding critical overloading

The strain sensors from X-Sensors reliably measure even smallest strains on the surface of flat structures. Thanks to the strong and simple screw-on mounting, the measured values are more than comparable to glued strain gauges. Even more, because of the protecting housing, disadvantages of glued strain gauges are avoided. Thanks to the integrated, extremely low-noise and highly stable signal amplifier, the sensors are universal applicable.

Functionality

The surface strain sensor X-103-7 monitors the strain between its two mounting screws and amplifies this mechanically. In this way the strain is concentrated in the measuring area and can therefore be measured using a resistive strain gauge bridge. The integrated amplifier provides a signal conditioning and delivers a linear, robust output signal. The solid steel housing and the robust design (IP64) guarantee problem-free operation, even under difficult environmental conditions.

Zero point adjustment

The zero point adjustment at these strain sensors is carried out by a digital zero adjustment mechanism. The zero point adjustment is stored permanently, it is not lost after a power off. It provides a non-volatile, stable zero point. Therefore, it is qualified for all static applications (installation tara). The numbers of tarings is limited to 100.000.

The reset input does trigger a zero point adjustment. It is available with an “Active Low” and “Active High” Logic.

 

操作手册:X-SENSORS-Strain_Sensors_for_static_applications - DigTara - Datasheet - EN.pdf

网站首页 | 公司简介 | Hematech | X-sensors | 行业应用 | 资料下载 | 联系我们
地址:上海市奉贤区奉浦工业园奉浦大道111号   电话:021-31332784   手机:17521136887   传真:021-31332788
版权所有:上海慎悟自动化科技有限公司   沪ICP备18019503号-1   【管理入口